Schröder Industrieöfen - Härteöfen, Wärmeschränke, Umluftöfen, Brennöfen, Kammeröfen, Härtefolie - Series FD - Drying cabinets with with natural air circulation or forced air circulation up to 300°C

Home

Business area I: Industry/Metal

Öfen zur Wärmebehandlung von Metallen

Hilfsmittel: Härten, Aufkohlen, Glühen, Nitrieren, Brünieren

Business area II: Industry/Non-Metal

Öfen für Keramik, Glas, F&E, Labor, Dental

Öfen für Dental

Business area III: Ceramic art

Öfen
für Arts & Crafts

Töpferei- und Keramikerbedarf

Series FD - Drying cabinets with with natural air circulation or forced air circulation up to 300°C

Drying cabinets ED series - drying cabinets with natural air circulation
Routine drying and sterilization applications up to 300 °C and precisely controlled elevated temperatures are the strengths of ED drying cabinets: Due to the natural air circulation with a high rate of air exchange, thermal processes run with significantly increased efficiency.

Drying cabinets series FD - drying cabinets with forced air circulation
FD series units are primarily used in applications needing especially rapid drying and sterilization. With a totally homogenous temperature distribution, rapid dynamic response and our specially developed air turbine with a higher output of 20%, the FD is saving useful time.

■ Electronically controlled APT.Iine™ preheating chamber technology
■ Temperature range of 5 °C above ambient temperature up to 300 °C
■ DS controller with integrated timer from 0 to99h
■ Digital temperature setting to the degree
■ Adjustable ramp function
■ Adjustable temperature limiter class 2 (DIN 12880) with visual temperature alarm
■ Adjustable air renewal by means of air flaps at the front and exhaust pipe Ø 50 mm at the rear
■ Optionally with or without interface RS 422 for communication software APT-COM™ DataControlSystem
■ Units up to 115 liters are stackable
■ 2 chrome-plated drawers
1) without window 2) Up to 93 % ofthe set value 3) The air renewal is depending on the inner chamber and on
the ambient temperature and is subject to a high individual variance. The indicated air exchange rates correspond
to average values for standard devices. Individual air exchange measurements according to ASTM D5374 are
optionally available.

All technical data exclusively apply for devices with standard type operating at an ambient temperature of 25 °C and a main voltage fluctuation of ± 10 %. These temperature values are determined in accordance with the factory standard referring to DIN 12880, part 2 and are based on the recommended wall clearances amounting to 10 % of the height, width and depth of the inner chamber. For serial devices all indications are average values. We reserve the right to make technical alteration.