Home  Non-metal Safety drying cabinets with First Class Safety up to 300°C
|
|
Safety drying cabinets with First Class Safety up to 300°C |
|
This series offers the perfect environment for solvent-containing samples: a inner chamber free of silicone and dust due to the highly efficient filter cartridge and a symmetrical airflow with defined flow velocities. FDL thus complies with all EN 1539 and ISO 3251 requirements and its program with the intelligent fresh-air monitoring offers maximum occupational safety.
| Performance features/Equipment series FDL
■ Electronically controlled APT.Iine™ preheating chamber technology guarantees a high temperature accuracy and repeatable results
■ In compliance with all safety requiements according to EN 1539 and VBG 24
■ Temperature range 5 °C above ambient temperature up to 300 °C
■ MP controller with 2 programs with 10 sections, each, alternatively switchable to 1 program with 20 sections
■ The time interval of one individual program section optionally can be set up to maximum 99.59 h or 999.59 h. This adjustment applies to all program sections.
■ Integrated weekly timer with real-time function.
■ Adjustable ramp function via program editor
■ Operating hours counter
■ Door gasket made of Viton (up to max. 200 °C)
■ Replaceable fresh-air filter cartridge class F6 (EU6 fine particulate air filter for particles from 1 to 10 μm)
■ Adjustable temperature limiter class 2 (DIN 12880) with acoustic and visual alarm
■ Fresh-air monitoring with acoustic alarm and -automatic heating switch off
■ Rear exhaust air connection Ø 100 mm
■ Printer and communication interface RS 422 for communication software APT-COM™ DataControlSystem
■ 2 chrome-plated drawers
|
1) without window 2) Up to 93 % of the set value
All technical data exclusively apply for devices with standard type operating at an ambient temperature of 25 °C and a main voltage fluctuation of ± 10 %. These temperature values are determined in accordance with the factory standard referring to DIN 12880, part 2 and are based on the recommended wall clearances amounting to 10 % of the height, width and depth of the inner chamber. For serial devices all indications are average values. We reserve the right to make technical alteration. |
|
